BC Racing coilovers for the 15-19 Subaru Legacy (BN9). Pick your setup above. Every kit is height adjustable and fully rebuildable.
Series options
- BR Series: BC Racing’s entry coilover. Mono-tube damper with a linear piston and 30 clicks of damping that set compression and rebound together. Ride height adjusts separately from spring preload, and front camber plates come standard where the car allows. 1-year BC Racing warranty against manufacturing defects.
- DS Series: Built like the BR Series with a digressive piston and damping curve and a satin chrome shock body. 30 clicks of combined compression and rebound, ride height separate from spring preload, and front camber plates standard where the car allows. 1-year BC Racing warranty against manufacturing defects.
- RM Series: Inverted mono-tube strut with a linear piston and 30 clicks of combined compression and rebound. Ride height adjusts separately from spring preload, and front camber plates come standard where the car allows. 1-year BC Racing warranty against manufacturing defects.
Top mounts
- Pillowball front mounts: Pillowball front top mounts (camber adjustable where the car allows), with rubber or factory mounts in the rear.
- Pillowball front and rear: Pillowball top mounts front and rear (camber adjustable where the car allows).
BC Racing’s advice: pillowball mounts are much stiffer than rubber or factory mounts and add noise and vibration in the cabin. For a street car, stick with the standard setup (the lowest-priced option) unless it’s a dedicated track build. Upgraded top mount setups add $110.
Lead time
If BC Racing has your kit in stock, it ships to our shop from their warehouse. If not, they build it to order, which takes 4 to 6 weeks. We’ll confirm your timing after you order.
Install
Ships to our El Cajon shop. Pick Install at California Motorsports at checkout and our crew fits it, or pick it up at the shop. Plan on a wheel alignment after any coilover install.
Need custom spring rates, Swift springs or an Extreme Low build? BC Racing makes those as custom orders. Call or email us for a quote.
Fitment
Check that this part matches your exact year, model and drivetrain before you order. Not sure? Send us your VIN and we’ll check it. Photos show the coilover series. Your kit is built for your car.
Part numbers
- BR Series, pillowball front mounts: F-27-BR-RA
- BR Series, pillowball front and rear: F-27-BR-RH
- DS Series, pillowball front mounts: F-27-DS-DA
- DS Series, pillowball front and rear: F-27-DS-DH
- RM Series, pillowball front mounts: F-27-RM-MA




















