The Forge Adjustable Actuator for Mitsubishi Evo 4/5/6/7/8 is a billet aluminum replacement turbo wastegate actuator for the Mitsubishi Lancer Evolution 4 through 8. It bolts in place of the factory actuator and is built with a red Forge spring, so wastegate control can be matched to a stock or tuned engine.
Key Features
- Two-piece billet body machined from 6026 grade aluminum
- Vehicle and turbo specific design for direct replacement of the factory unit
- 303 grade stainless steel actuator rod, with laser cut stainless steel brackets where applicable
- Piston type internals with hard-wearing piston seals, which Forge rates as equal in performance to its diaphragm version with lower maintenance
- Designed to hold factory boost or slightly above, with stronger springs available for tuned cars
- Serviceable and rebuildable, with Forge service kits and spring tuning kits sold separately
Specifications
- Part number: FMEVACT-PIS-RED
- Brand: Forge Motorsport
- Internals: Piston
- Spring: Red
- Spring pressures are mechanical figures; on ECU controlled engines choose the spring with your tuner
- Contents: 1 x actuator, 1 x Forge sticker
Fitment
- Mitsubishi Lancer Evolution IV, V, VI, VII and VIII
A wastegate actuator uses boost pressure acting against a spring to open the turbo wastegate. The spring rate sets the pressure at which the wastegate starts to open, so changing the spring changes the boost the turbo can hold. Factory actuators can weaken with age and heat, letting boost creep or fall away. On modern engines the ECU and boost solenoid set the final boost level, so Forge advises choosing a spring with your tuner rather than matching psi figures directly.
Specs
- Part number: FMEVACT-PIS-RED (Spring: Red, Actuators: Piston Type), FMEVACT-PIS-YEL (Spring: Yellow, Actuators: Piston Type)
Ships to our El Cajon shop for installation, or you can pick it up there. We order it from the manufacturer once your order is in and confirm timing with you.


















