The Forge FMFK054 is a blow off valve and fitting kit for the Renault Megane 225 and 230. It adds a hand polished valve on a silicone hose with valve take-off, and blanks the original diverter valve outlet.
Key Features
- Hand polished valve finish
- Silicone hose with integrated valve take-off, here in black
- Uprated blue dump valve spring and small spring for cars running higher ECU boost
- FMBPVRM plate blanks the original diverter valve outlet
- Designed, manufactured and assembled by Forge
Specifications
- Part number: FMFK054-BLA
- Brand: Forge Motorsport
- Hose color: Black
- Hose ID: 50mm x 54mm x 25mm, 5mm wall, 175mm overall length
- Contents: valve, 2000mm of 4mm vacuum tube, 1 x 35mm and 2 x 60mm hose clamps, 5mm T-piece, 6 x cable ties, FMBPVRM blanking plate, Forge sticker
Fitment
- Renault Megane 225 and 230 (2.0 16v turbo)
When the throttle closes on a turbocharged engine, pressurized air in the intake has nowhere to go. A blow off (dump) valve opens on that pressure signal and releases the charge, protecting the turbo from compressor surge and helping it keep spinning between shifts. Atmospheric valves vent to the air for an audible release, while recirculating valves route the air back into the intake ahead of the turbo, keeping metered air in the system on MAF equipped engines.
Specs
- Part number: FMFK054-BLA
Ships to our El Cajon shop for installation, or you can pick it up there. We order it from the manufacturer once your order is in and confirm timing with you.


















