The Forge FMBM335DV1 kit pairs an alloy throttle body hard pipe with a single high flow blow off valve for N54 BMW engines. This version is set with the yellow spring plus 15.65mm shim, the stock vehicle setting.
Key Features
- Single high flow valve with a 50mm (2 in) aluminum piston
- Heat-stabilized Viton O-rings and high temperature grease
- Alloy throttle body hard pipe replaces the factory charge pipe section
- High flow, low restriction valve is quiet in operation
- Spring tuning kits available separately
Specifications
- Part number: FMBM335DV1-BLA-YEL-+ 15.65mm Shim (-8 PSI) Stock Vehicle
- Brand: Forge Motorsport
- Spring: Yellow spring plus 15.65mm shim (-8 psi), stock vehicle
- Valve color: Black
- Contents: valve, alloy throttle body hard pipe, silicone reducer, 2 x 25mm silicone blanks, hose clamps (2 x 30mm, 80mm, 90mm), M6 bolts and washers, USB instructions, Forge keyring, bottle opener and sticker
Fitment
- BMW 335i / 335xi E90, E91, E92, E93 N54, 2007 to 2010
- BMW 335is N54
- BMW 135i and 1M N54 (per product name)
When the throttle closes on a turbocharged engine, pressurized air in the intake has nowhere to go. A blow off (dump) valve opens on that pressure signal and releases the charge, protecting the turbo from compressor surge and helping it keep spinning between shifts. Atmospheric valves vent to the air for an audible release, while recirculating valves route the air back into the intake ahead of the turbo, keeping metered air in the system on MAF equipped engines.
Specs
- Part number: FMBM335DV1-BLA-YEL-+ 15.65mm Shim (-8 PSI) Stock Vehicle
Ships to our El Cajon shop for installation, or you can pick it up there. We order it from the manufacturer once your order is in and confirm timing with you.


















