(619) 929-7710El Cajon · Mon–Fri 8–5 · Sat 9–12
4.663 Google reviews of our shop

LIQUI MOLY Pro-Line Diesel Particulate Filter Purge – Case of 6 x 500mL

Original price was: $233.94.Current price is: $201.99. ($33.67 each)
Confirm fitment before you order. Fitment info comes from the manufacturer and is a guide, not a guarantee. You are responsible for confirming this part fits your exact year, model, trim, brakes and existing modifications. California Motorsports is not liable for parts that do not fit. Not sure? Send us your VIN and we will check before you buy. Terms of Sale

Out of stock

Secure checkoutVisaMastercardAmexDiscover
SKU 20112 Category Brand:
Questions before you buy? (619) 929-7710

Product details

Ahighly effective fluid for cleaning soot clogged DPF units without removal. Dissolves contaminants inside DPFs, restores vehicle performance and fuel consumption. Regular servicing of dpf units can help avoid expensive repair costs. Use only together with Pro-Line Diesel Particulate Filter Cleaner (part no. 20110), to apply use only DPF Pressurized Tank Spray Gun (part no.7946), DPF-Probe with 5 interchangeable tips (part no. 7945) and if needed DPF Spray Probe long (part no. 20630).
Fordiesel engines with diesel particulate filter (DPF/FAP). Special short-distance vehicles and city vehicles are primarily affected by problems with clogged diesel particulate filters. For professional repair shop use only.
Cleaning is made with the compressed air gun for DPF (item no. 7946) and the specially developed DPF-Probe with 5 interchangeable tips (part no. 7945). The diesel particle filter must be accessed depending on the vehicle type. In order to do this, the temperature or pressure sensor on the diesel particle filter must be removed on most vehicles. Observe: When cleaning, the particle filter’s temperature should be below 104F. On some vehicles the diesel particle filter is located near to the exhaust manifold or, optionally, the turbocharger, and not on the vehicle underbody. For safety reasons, utmost care must be taken when cleaning such vehicles – cleaning or flushing liquid may otherwise enter the combustion chamber through an open exhaust valve. The appropriate Pro-Line spray probe for the vehicle type is then fed into the particle filter through the opening. The full container of Pro-Line cleaner for diesel particle filters (1 liter) is sprayed directly onto the surface of the particle filter in intervals of 5 to 10 seconds (each with a break of 5 to 10 seconds in between) at an operating pressure of87 to 116 psi. The probe must be rotated and moved back and forth during cleaning in order to cover as much of the filter surface with Pro-Line cleaner. The particle filter is then flushed with the full container of Pro-Line flushing liquid for diesel particle filters (500 ml). The compressed air gun for DPF (item no. 7946) is also used here at the same intervals as during the cleaning process. The particulate deposits are dissolved during the cleaning process and distributed around the diesel particle filter, where they can then be burned off as part of normal regeneration. After reinstalling the sensor, the service centre or workshop must trigger regeneration according to the manufacturers’ instruction. Caution: The protective measures for safe handling can be found in the safety data sheet.

  • Guarantees Low Fuel Consumption
  • Optimal Engine Performance
  • Reduces Operating Costs
  • Dissolves Soot

Shop reviews

Rated 4.6 on Google

Read all 63 reviews on Google

“Pricing is better than anywhere I’ve found in San Diego.”

Google review

“The turnaround was impressively fast and the quality of the work exceeded my expectations.”

Google review

“One stop shop, these guys do it all.”

Google review
More from the shop

Keep looking

0